Im trying to understand what i am missing or what i have done wrong. Any help appreciated. I continue learn about coding and practicing my understanding of solidity, crypto and smart contracts.
I successfully deployed my contract to the bscan network. When i try to verify i get this message. Error! Unable to generate Contract ByteCode and ABI
Found the following ContractName(s) in source code : Token
But we were unable to locate a matching bytecode (err_code_2)
Can one of you brilliant people point out where the error is? i have read so many posts, watch videos and i am yet to find the asnswer
thanks in advance
// SPDX-License-Identifier: MIT
// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router01.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// File: contracts/math/IterableMapping.sol
pragma solidity ^0.8.8;
library IterableMapping {
// Iterable mapping from address to uint;
struct Map {
address[] keys;
mapping(address => uint256) values;
mapping(address => uint256) indexOf;
mapping(address => bool) inserted;
}
function get(Map storage map, address key) internal view returns (uint256) {
return map.values[key];
}
function getIndexOfKey(Map storage map, address key)
internal
view
returns (int256)
{
if (!map.inserted[key]) {
return -1;
}
return int256(map.indexOf[key]);
}
function getKeyAtIndex(Map storage map, uint256 index)
internal
view
returns (address)
{
return map.keys[index];
}
function size(Map storage map) internal view returns (uint256) {
return map.keys.length;
}
function set(
Map storage map,
address key,
uint256 val
) internal {
if (map.inserted[key]) {
map.values[key] = val;
} else {
map.inserted[key] = true;
map.values[key] = val;
map.indexOf[key] = map.keys.length;
map.keys.push(key);
}
}
function remove(Map storage map, address key) internal {
if (!map.inserted[key]) {
return;
}
delete map.inserted[key];
delete map.values[key];
uint256 index = map.indexOf[key];
uint256 lastIndex = map.keys.length - 1;
address lastKey = map.keys[lastIndex];
map.indexOf[lastKey] = index;
delete map.indexOf[key];
map.keys[index] = lastKey;
map.keys.pop();
}
}
// File: contracts/interface/DividendPayingTokenOptionalInterface.sol
pragma solidity ^0.8.8;
/// @title Dividend-Paying Token Optional Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev OPTIONAL functions for a dividend-paying token contract.
interface DividendPayingTokenOptionalInterface {
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function withdrawableDividendOf(address _owner)
external
view
returns (uint256);
/// @notice View the amount of dividend in wei that an address has withdrawn.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has withdrawn.
function withdrawnDividendOf(address _owner)
external
view
returns (uint256);
/// @notice View the amount of dividend in wei that an address has earned in total.
/// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has earned in total.
function accumulativeDividendOf(address _owner)
external
view
returns (uint256);
}
// File: contracts/interface/DividendPayingTokenInterface.sol
pragma solidity ^0.8.10;
/// @title Dividend-Paying Token Interface
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev An interface for a dividend-paying token contract.
interface DividendPayingTokenInterface {
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function dividendOf(address _owner) external view returns (uint256);
/// @notice Withdraws the ether distributed to the sender.
/// @dev SHOULD transfer `dividendOf(msg.sender)` wei to `msg.sender`, and `dividendOf(msg.sender)` SHOULD be 0 after the transfer.
/// MUST emit a `DividendWithdrawn` event if the amount of ether transferred is greater than 0.
function withdrawDividend() external;
/// @dev This event MUST emit when ether is distributed to token holders.
/// @param from The address which sends ether to this contract.
/// @param weiAmount The amount of distributed ether in wei.
event DividendsDistributed(address indexed from, uint256 weiAmount);
/// @dev This event MUST emit when an address withdraws their dividend.
/// @param to The address which withdraws ether from this contract.
/// @param weiAmount The amount of withdrawn ether in wei.
event DividendWithdrawn(address indexed to, uint256 weiAmount);
}
// File: contracts/math/SafeMathInt.sol
pragma solidity ^0.8.8;
/**
* @title SafeMathInt
* @dev Math operations for int256 with overflow safety checks.
*/
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
// File: contracts/math/SafeMathUint.sol
pragma solidity ^0.8.8;
/**
* @title SafeMathUint
* @dev Math operations with safety checks that revert on error
*/
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(
senderBalance >= amount,
"ERC20: transfer amount exceeds balance"
);
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: contracts/misc/DividendPayingToken.sol
pragma solidity ^0.8.10;
/// @title Dividend-Paying Token
/// @author Roger Wu (https://github.com/roger-wu)
/// @dev A mintable ERC20 token that allows anyone to pay and distribute ether
/// to token holders as dividends and allows token holders to withdraw their dividends.
/// Reference: the source code of PoWH3D: https://etherscan.io/address/0xB3775fB83F7D12A36E0475aBdD1FCA35c091efBe#code
contract DividendPayingToken is
ERC20,
Ownable,
DividendPayingTokenInterface,
DividendPayingTokenOptionalInterface
{
using SafeMath for uint256;
using SafeMathUint for uint256;
using SafeMathInt for int256;
address public constant BUSD =
address(0xe9e7CEA3DedcA5984780Bafc599bD69ADd087D56); //BUSD
// With `magnitude`, we can properly distribute dividends even if the amount of received ether is small.
// For more discussion about choosing the value of `magnitude`,
// see https://github.com/ethereum/EIPs/issues/1726#issuecomment-472352728
uint256 internal constant magnitude = 2**128;
uint256 internal magnifiedDividendPerShare;
// About dividendCorrection:
// If the token balance of a `_user` is never changed, the dividend of `_user` can be computed with:
// `dividendOf(_user) = dividendPerShare * balanceOf(_user)`.
// When `balanceOf(_user)` is changed (via minting/burning/transferring tokens),
// `dividendOf(_user)` should not be changed,
// but the computed value of `dividendPerShare * balanceOf(_user)` is changed.
// To keep the `dividendOf(_user)` unchanged, we add a correction term:
// `dividendOf(_user) = dividendPerShare * balanceOf(_user) + dividendCorrectionOf(_user)`,
// where `dividendCorrectionOf(_user)` is updated whenever `balanceOf(_user)` is changed:
// `dividendCorrectionOf(_user) = dividendPerShare * (old balanceOf(_user)) - (new balanceOf(_user))`.
// So now `dividendOf(_user)` returns the same value before and after `balanceOf(_user)` is changed.
mapping(address => int256) internal magnifiedDividendCorrections;
mapping(address => uint256) internal withdrawnDividends;
uint256 public totalDividendsDistributed;
constructor(string memory _name, string memory _symbol)
ERC20(_name, _symbol)
{}
function decimals() public pure override returns (uint8) {
return 18;
}
function distributeETHDividends(uint256 amount) public onlyOwner {
require(totalSupply() > 0);
if (amount > 0) {
magnifiedDividendPerShare = magnifiedDividendPerShare.add(
(amount).mul(magnitude) / totalSupply()
);
emit DividendsDistributed(msg.sender, amount);
totalDividendsDistributed = totalDividendsDistributed.add(amount);
}
}
/// @notice Withdraws the ether distributed to the sender.
/// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
function withdrawDividend() public virtual override {
_withdrawDividendOfUser(payable(msg.sender));
}
/// @notice Withdraws the ether distributed to the sender.
/// @dev It emits a `DividendWithdrawn` event if the amount of withdrawn ether is greater than 0.
function _withdrawDividendOfUser(address payable user)
internal
returns (uint256)
{
uint256 _withdrawableDividend = withdrawableDividendOf(user);
if (_withdrawableDividend > 0) {
withdrawnDividends[user] = withdrawnDividends[user].add(
_withdrawableDividend
);
emit DividendWithdrawn(user, _withdrawableDividend);
bool success = IERC20(BUSD).transfer(user, _withdrawableDividend);
if (!success) {
withdrawnDividends[user] = withdrawnDividends[user].sub(
_withdrawableDividend
);
return 0;
}
return _withdrawableDividend;
}
return 0;
}
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function dividendOf(address _owner) public view override returns (uint256) {
return withdrawableDividendOf(_owner);
}
/// @notice View the amount of dividend in wei that an address can withdraw.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` can withdraw.
function withdrawableDividendOf(address _owner)
public
view
override
returns (uint256)
{
return accumulativeDividendOf(_owner).sub(withdrawnDividends[_owner]);
}
/// @notice View the amount of dividend in wei that an address has withdrawn.
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has withdrawn.
function withdrawnDividendOf(address _owner)
public
view
override
returns (uint256)
{
return withdrawnDividends[_owner];
}
/// @notice View the amount of dividend in wei that an address has earned in total.
/// @dev accumulativeDividendOf(_owner) = withdrawableDividendOf(_owner) + withdrawnDividendOf(_owner)
/// = (magnifiedDividendPerShare * balanceOf(_owner) + magnifiedDividendCorrections[_owner]) / magnitude
/// @param _owner The address of a token holder.
/// @return The amount of dividend in wei that `_owner` has earned in total.
function accumulativeDividendOf(address _owner)
public
view
override
returns (uint256)
{
return
magnifiedDividendPerShare
.mul(balanceOf(_owner))
.toInt256Safe()
.add(magnifiedDividendCorrections[_owner])
.toUint256Safe() / magnitude;
}
/// @dev Internal function that transfer tokens from one address to another.
/// Update magnifiedDividendCorrections to keep dividends unchanged.
/// @param from The address to transfer from.
/// @param to The address to transfer to.
/// @param value The amount to be transferred.
function _transfer(
address from,
address to,
uint256 value
) internal virtual override {
require(false);
int256 _magCorrection = magnifiedDividendPerShare
.mul(value)
.toInt256Safe();
magnifiedDividendCorrections[from] = magnifiedDividendCorrections[from]
.add(_magCorrection);
magnifiedDividendCorrections[to] = magnifiedDividendCorrections[to].sub(
_magCorrection
);
}
/// @dev Internal function that mints tokens to an account.
/// Update magnifiedDividendCorrections to keep dividends unchanged.
/// @param account The account that will receive the created tokens.
/// @param value The amount that will be created.
function _mint(address account, uint256 value) internal override {
super._mint(account, value);
magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
account
].sub((magnifiedDividendPerShare.mul(value)).toInt256Safe());
}
/// @dev Internal function that burns an amount of the token of a given account.
/// Update magnifiedDividendCorrections to keep dividends unchanged.
/// @param account The account whose tokens will be burnt.
/// @param value The amount that will be burnt.
function _burn(address account, uint256 value) internal override {
super._burn(account, value);
magnifiedDividendCorrections[account] = magnifiedDividendCorrections[
account
].add((magnifiedDividendPerShare.mul(value)).toInt256Safe());
}
function _setBalance(address account, uint256 newBalance) internal {
uint256 currentBalance = balanceOf(account);
if (newBalance > currentBalance) {
uint256 mintAmount = newBalance.sub(currentBalance);
_mint(account, mintAmount);
} else if (newBalance < currentBalance) {
uint256 burnAmount = currentBalance.sub(newBalance);
_burn(account, burnAmount);
}
}
}
// File: contracts/MaticRewardToken.sol
pragma solidity ^0.8.10;
contract ToonKingVII is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private swapping;
bool public isTradingEnabled;
TOKENDividendTracker public dividendTracker;
address private constant BUSD =
address(0xe9e7CEA3DedcA5984780Bafc599bD69ADd087D56); //BUSD
address private constant deadWallet = address(0xdead);
uint256 public swapTokensAtAmount = 1 * 10**12 * (10**18);
uint256 public maxBuyAmount = 1 * 10**15 * 10**18;
uint256 public maxSellAmount = 1 * 10**15 * 10**18;
uint256 public maxWalletAmount = 1 * 10**15 * 10**18;
uint256 public buybackLimit = 1 ether;
address public marketingWallet = address(0xed7790247b555d8ded6a3e58ED63100991B3Bfda); //marketing wallet
address public developmentWallet = address(0xf8E7566e8c48A8F067341E8934C9F99cC587Da47); //development wallet
uint16 public transferRewardsFee = 25;
uint16 public transferLiquidityFee = 25;
uint16 public transferMarketingFee = 25;
uint16 public transferDevelopmentFee = 0;
uint16 public transferBuybackFee = 0;
uint16 private totalTransferFee = 100; // 1% Transfer fee
uint16 public rewardsFee = 800; // 8% fee
uint16 public liquidityFee = 200; // 2% fee
uint16 public marketingFee = 400; // 4% fee
uint16 public developmentFee = 0; // 0% fee
uint16 public buybackFee = 0; // 0% fee
uint16 private totalFees =
rewardsFee + liquidityFee + marketingFee + developmentFee + buybackFee;
// use by default 300,000 gas to process auto-claiming dividends
uint256 public gasForProcessing = 300000;
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
event UpdateDividendTracker(
address indexed newAddress,
address indexed newTracker
);
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event LiquidityWalletUpdated(
address indexed newLiquidityWallet,
address indexed oldLiquidityWallet
);
event GasForProcessingUpdated(
uint256 indexed newValue,
uint256 indexed oldValue
);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
event SendDividends(uint256 tokensSwapped, uint256 amount);
event ProcessedDividendTracker(
uint256 iterations,
uint256 claims,
uint256 lastProcessedIndex,
bool indexed automatic,
uint256 gas,
address indexed processor
);
constructor() ERC20("ToonKingV2", "TKTv2") {
dividendTracker = new TOKENDividendTracker();
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x10ED43C718714eb63d5aA57B78B54704E256024E
// testnet PCS router: 0x9Ac64Cc6e4415144C455BD8E4837Fea55603e5c3
// mainnet PCS V2 router: 0x10ED43C718714eb63d5aA57B78B54704E256024E
);
// Create a uniswap pair for this new token
address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = _uniswapV2Pair;
_setAutomatedMarketMakerPair(_uniswapV2Pair, true);
// exclude from receiving dividends
dividendTracker.excludeFromDividends(address(dividendTracker));
dividendTracker.excludeFromDividends(address(this));
dividendTracker.excludeFromDividends(owner());
dividendTracker.excludeFromDividends(deadWallet);
dividendTracker.excludeFromDividends(address(_uniswapV2Router));
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(owner(), 1 * 10**15 * (10**18));
}
receive() external payable {}
function decimals() public pure override returns (uint8) {
return 18;
}
function updateDividendTracker(address newAddress) public onlyOwner {
require(
newAddress != address(dividendTracker),
"Token: The dividend tracker already has that address"
);
TOKENDividendTracker newDividendTracker = TOKENDividendTracker(
payable(newAddress)
);
require(
newDividendTracker.owner() == address(this),
"Token: The new dividend tracker must be owned by the Token token contract"
);
newDividendTracker.excludeFromDividends(address(newDividendTracker));
newDividendTracker.excludeFromDividends(address(this));
newDividendTracker.excludeFromDividends(owner());
newDividendTracker.excludeFromDividends(address(uniswapV2Router));
emit UpdateDividendTracker(newAddress, address(dividendTracker));
dividendTracker = newDividendTracker;
}
function updateUniswapV2Router(address newAddress) public onlyOwner {
emit UpdateUniswapV2Router(newAddress, address(uniswapV2Router));
uniswapV2Router = IUniswapV2Router02(newAddress);
address _uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory())
.createPair(address(this), uniswapV2Router.WETH());
uniswapV2Pair = _uniswapV2Pair;
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function excludeMultipleAccountsFromFees(
address[] calldata accounts,
bool excluded
) public onlyOwner {
for (uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFees[accounts[i]] = excluded;
}
emit ExcludeMultipleAccountsFromFees(accounts, excluded);
}
function setWallets(address _w1, address _w2) external onlyOwner {
marketingWallet = _w1;
developmentWallet = _w2;
}
function setFees(
uint8 _market,
uint8 _liq,
uint8 _reward,
uint8 _develop,
uint8 _buyback
) external onlyOwner {
require(_market <= 800, "8% max marketing fee");
require(_liq <= 600, "6% max liq fee");
require(_reward <= 1000, "10% max reward fee");
require(_develop <= 400, "4% max develop fee");
require(_buyback <= 200, "2% max buyback fee");
marketingFee = _market;
liquidityFee = _liq;
rewardsFee = _reward;
developmentFee = _develop;
buybackFee = _buyback;
totalFees = _market + _liq + _reward + _develop + _buyback;
}
function setTransferFees(
uint8 _market,
uint8 _liq,
uint8 _reward,
uint8 _develop,
uint8 _buyback
) external onlyOwner {
require(_market <= 200, "2% max transfermarketing fee");
require(_liq <= 200, "2% max transferliq fee");
require(_reward <= 200, "2% max transferreward fee");
require(_develop <= 200, "2% max transferdevelop fee");
require(_buyback <= 200, "2% max transferbuyback fee");
transferMarketingFee = _market;
transferLiquidityFee = _liq;
transferRewardsFee = _reward;
transferDevelopmentFee = _develop;
transferBuybackFee = _buyback;
totalTransferFee = _market + _liq + _reward + _develop + _buyback;
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
_setAutomatedMarketMakerPair(pair, value);
}
function setSwapTokens(uint256 amount) external onlyOwner {
swapTokensAtAmount = amount;
}
function setMaxBuy(uint256 amount) external onlyOwner {
require ( amount >= 1 * 10**11 * 10**18, "Can't set lower than 100 billion tokens, no rug pull");
maxBuyAmount = amount;
}
function enableTrading() external onlyOwner {
isTradingEnabled = true;
}
function setMaxSell(uint256 amount) external onlyOwner {
require ( amount >= 1 * 10**11 * 10**18, "Can't set lower than 100 billion tokens, no rug pull");
maxSellAmount = amount;
}
function setMaxWallet(uint256 amount) external onlyOwner {
require ( amount >= 1 * 10**11 * 10**18, "Can't set lower than 100 billion tokens, no rug pull");
maxWalletAmount = amount;
}
function setBuyBackLimit(uint256 value) external onlyOwner {
buybackLimit = value;
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
if (value) {
dividendTracker.excludeFromDividends(pair);
}
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateGasForProcessing(uint256 newValue) public onlyOwner {
require(newValue >= 200000 && newValue <= 500000);
emit GasForProcessingUpdated(newValue, gasForProcessing);
gasForProcessing = newValue;
}
function updateClaimWait(uint256 claimWait) external onlyOwner {
dividendTracker.updateClaimWait(claimWait);
}
function getClaimWait() external view returns (uint256) {
return dividendTracker.claimWait();
}
function getTotalDividendsDistributed() external view returns (uint256) {
return dividendTracker.totalDividendsDistributed();
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
function withdrawableDividendOf(address account)
public
view
returns (uint256)
{
return dividendTracker.withdrawableDividendOf(account);
}
function dividendTokenBalanceOf(address account)
public
view
returns (uint256)
{
return dividendTracker.balanceOf(account);
}
function excludeFromDividends(address account) external onlyOwner {
dividendTracker.excludeFromDividends(account);
}
function getAccountDividendsInfo(address account)
external
view
returns (
address,
int256,
int256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
return dividendTracker.getAccount(account);
}
function getAccountDividendsInfoAtIndex(uint256 index)
external
view
returns (
address,
int256,
int256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
return dividendTracker.getAccountAtIndex(index);
}
function processDividendTracker(uint256 gas) external {
(
uint256 iterations,
uint256 claims,
uint256 lastProcessedIndex
) = dividendTracker.process(gas);
emit ProcessedDividendTracker(
iterations,
claims,
lastProcessedIndex,
false,
gas,
tx.origin
);
}
function claim() external {
dividendTracker.processAccount(payable(msg.sender), false);
}
function getLastProcessedIndex() external view returns (uint256) {
return dividendTracker.getLastProcessedIndex();
}
function getNumberOfDividendTokenHolders() external view returns (uint256) {
return dividendTracker.getNumberOfTokenHolders();
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (!swapping && !automatedMarketMakerPairs[from]) {
uint256 balance = address(this).balance;
if (balance > buybackLimit) {
swapETHForTokens(buybackLimit.div(10));
}
}
if (
canSwap &&
!swapping &&
!automatedMarketMakerPairs[from] &&
from != owner() &&
to != owner()
) {
swapping = true;
contractTokenBalance = swapTokensAtAmount;
uint256 feeTokens = contractTokenBalance
.mul(
(totalFees + totalTransferFee) -
(liquidityFee + transferLiquidityFee)
)
.div(totalFees + totalTransferFee);
swapAndDistribute(feeTokens);
uint256 swapTokens = contractTokenBalance.sub(feeTokens);
swapAndLiquify(swapTokens);
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
if (takeFee) {
require(isTradingEnabled, "Trading not enabled yet");
if (automatedMarketMakerPairs[from]) {
require(amount <= maxBuyAmount, "Buy exceeds limit");
} else if (automatedMarketMakerPairs[to]) {
require(amount <= maxSellAmount, "Sell exceeds limit");
}
if (!automatedMarketMakerPairs[to]) {
require(
amount + balanceOf(to) <= maxWalletAmount,
"Wallet exceeds limit"
);
}
uint256 fees;
if (
automatedMarketMakerPairs[from] || automatedMarketMakerPairs[to]
) {
fees = amount.mul(totalFees).div(10000);
} else {
fees = amount.mul(totalTransferFee).div(10000);
}
amount = amount.sub(fees);
super._transfer(from, address(this), fees);
}
super._transfer(from, to, amount);
try
dividendTracker.setBalance(payable(from), balanceOf(from))
{} catch {}
try dividendTracker.setBalance(payable(to), balanceOf(to)) {} catch {}
if (!swapping) {
uint256 gas = gasForProcessing;
try dividendTracker.process(gas) returns (
uint256 iterations,
uint256 claims,
uint256 lastProcessedIndex
) {
emit ProcessedDividendTracker(
iterations,
claims,
lastProcessedIndex,
true,
gas,
tx.origin
);
} catch {}
}
}
function swapAndDistribute(uint256 tokens) private {
uint256 initialBalance = IERC20(BUSD).balanceOf(address(this));
swapTokensForBUSD(tokens);
uint256 newBalance = IERC20(BUSD).balanceOf(address(this)).sub(
initialBalance
);
uint16 walletfees = marketingFee +
transferMarketingFee +
transferDevelopmentFee +
developmentFee;
swapAndSendToFee(
newBalance.mul(walletfees).div(
(totalFees + totalTransferFee) -
(liquidityFee + transferLiquidityFee)
),
walletfees
);
swapAndSendDividends(
newBalance.mul(rewardsFee + transferRewardsFee).div(
(totalFees + totalTransferFee) -
(liquidityFee + transferLiquidityFee)
)
);
swapTokensForEth(BUSD,IERC20(BUSD).balanceOf(address(this)));
}
function swapAndSendToFee(uint256 amount, uint16 fees) private {
uint256 marketingShare = amount
.mul(marketingFee + transferMarketingFee)
.div(fees);
uint256 developmentShare = amount
.mul(developmentFee + transferDevelopmentFee)
.div(fees);
IERC20(BUSD).transfer(marketingWallet, marketingShare);
IERC20(BUSD).transfer(developmentWallet, developmentShare);
}
function swapAndLiquify(uint256 tokens) private {
// split the contract balance into halves
uint256 half = tokens.div(2);
uint256 otherHalf = tokens.sub(half);
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(address(this),half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(address token, uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = token;
path[1] = uniswapV2Router.WETH();
IERC20(token).approve(address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function swapTokensForBUSD(uint256 tokenAmount) private {
address[] memory path = new address[](3);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
path[2] = BUSD;
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function swapETHForTokens(uint256 amount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = uniswapV2Router.WETH();
path[1] = address(this);
// make the swap
uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{
value: amount
}(
0, // accept any amount of Tokens
path,
address(0xdead), // Burn address
block.timestamp.add(300)
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(0),
block.timestamp
);
}
function swapAndSendDividends(uint256 tokens) private {
bool success = IERC20(BUSD).transfer(address(dividendTracker), tokens);
if (success) {
dividendTracker.distributeETHDividends(tokens);
emit SendDividends(tokens, tokens);
}
}
}
contract TOKENDividendTracker is Ownable, DividendPayingToken {
using SafeMath for uint256;
using SafeMathInt for int256;
using IterableMapping for IterableMapping.Map;
IterableMapping.Map private tokenHoldersMap;
uint256 public lastProcessedIndex;
mapping(address => bool) public excludedFromDividends;
mapping(address => uint256) public lastClaimTimes;
uint256 public claimWait;
uint256 public immutable minimumTokenBalanceForDividends;
event ExcludeFromDividends(address indexed account);
event ClaimWaitUpdated(uint256 indexed newValue, uint256 indexed oldValue);
event Claim(
address indexed account,
uint256 amount,
bool indexed automatic
);
constructor()
DividendPayingToken("TKTv2_Dividend_Tracker", "TKTv2_Dividend_Tracker")
{
claimWait = 3600;
minimumTokenBalanceForDividends = 10000000000 * (10**18); //must hold 100000000000+ tokens
}
function _transfer(
address,
address,
uint256
) internal pure override {
require(false);
}
function withdrawDividend() public pure override {
require(false);
}
function excludeFromDividends(address account) external onlyOwner {
require(!excludedFromDividends[account]);
excludedFromDividends[account] = true;
_setBalance(account, 0);
tokenHoldersMap.remove(account);
emit ExcludeFromDividends(account);
}
function updateClaimWait(uint256 newClaimWait) external onlyOwner {
require(
newClaimWait >= 3600 && newClaimWait <= 86400,
"TOKEN_Dividend_Tracker: claimWait must be updated to between 1 and 24 hours"
);
emit ClaimWaitUpdated(newClaimWait, claimWait);
claimWait = newClaimWait;
}
function getLastProcessedIndex() external view returns (uint256) {
return lastProcessedIndex;
}
function getNumberOfTokenHolders() external view returns (uint256) {
return tokenHoldersMap.keys.length;
}
function getAccount(address _account)
public
view
returns (
address account,
int256 index,
int256 iterationsUntilProcessed,
uint256 withdrawableDividends,
uint256 totalDividends,
uint256 lastClaimTime,
uint256 nextClaimTime,
uint256 secondsUntilAutoClaimAvailable
)
{
account = _account;
index = tokenHoldersMap.getIndexOfKey(account);
iterationsUntilProcessed = -1;
if (index >= 0) {
if (uint256(index) > lastProcessedIndex) {
iterationsUntilProcessed = index.sub(
int256(lastProcessedIndex)
);
} else {
uint256 processesUntilEndOfArray = tokenHoldersMap.keys.length >
lastProcessedIndex
? tokenHoldersMap.keys.length.sub(lastProcessedIndex)
: 0;
iterationsUntilProcessed = index.add(
int256(processesUntilEndOfArray)
);
}
}
withdrawableDividends = withdrawableDividendOf(account);
totalDividends = accumulativeDividendOf(account);
lastClaimTime = lastClaimTimes[account];
nextClaimTime = lastClaimTime > 0 ? lastClaimTime.add(claimWait) : 0;
secondsUntilAutoClaimAvailable = nextClaimTime > block.timestamp
? nextClaimTime.sub(block.timestamp)
: 0;
}
function getAccountAtIndex(uint256 index)
public
view
returns (
address,
int256,
int256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
if (index >= tokenHoldersMap.size()) {
return (
0x0000000000000000000000000000000000000000,
-1,
-1,
0,
0,
0,
0,
0
);
}
address account = tokenHoldersMap.getKeyAtIndex(index);
return getAccount(account);
}
function canAutoClaim(uint256 lastClaimTime) private view returns (bool) {
if (lastClaimTime > block.timestamp) {
return false;
}
return block.timestamp.sub(lastClaimTime) >= claimWait;
}
function setBalance(address payable account, uint256 newBalance)
external
onlyOwner
{
if (excludedFromDividends[account]) {
return;
}
if (newBalance >= minimumTokenBalanceForDividends) {
_setBalance(account, newBalance);
tokenHoldersMap.set(account, newBalance);
} else {
_setBalance(account, 0);
tokenHoldersMap.remove(account);
}
processAccount(account, true);
}
function process(uint256 gas)
public
returns (
uint256,
uint256,
uint256
)
{
uint256 numberOfTokenHolders = tokenHoldersMap.keys.length;
if (numberOfTokenHolders == 0) {
return (0, 0, lastProcessedIndex);
}
uint256 _lastProcessedIndex = lastProcessedIndex;
uint256 gasUsed = 0;
uint256 gasLeft = gasleft();
uint256 iterations = 0;
uint256 claims = 0;
while (gasUsed < gas && iterations < numberOfTokenHolders) {
_lastProcessedIndex++;
if (_lastProcessedIndex >= tokenHoldersMap.keys.length) {
_lastProcessedIndex = 0;
}
address account = tokenHoldersMap.keys[_lastProcessedIndex];
if (canAutoClaim(lastClaimTimes[account])) {
if (processAccount(payable(account), true)) {
claims++;
}
}
iterations++;
uint256 newGasLeft = gasleft();
if (gasLeft > newGasLeft) {
gasUsed = gasUsed.add(gasLeft.sub(newGasLeft));
}
gasLeft = newGasLeft;
}
lastProcessedIndex = _lastProcessedIndex;
return (iterations, claims, lastProcessedIndex);
}
function processAccount(address payable account, bool automatic)
public
onlyOwner
returns (bool)
{
uint256 amount = _withdrawDividendOfUser(account);
if (amount > 0) {
lastClaimTimes[account] = block.timestamp;
emit Claim(account, amount, automatic);
return true;
}
return false;
}
}