@Cainuriel Share your contract address and source code.
1 Like
@Skyge, I have not shared it because the contract compiles perfectly in remix, both the original and the flattened contract. But here it is:
// File: IUniswap.sol
pragma solidity ^0.8.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
// File: Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal virtual {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash =
0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) =
target.call{value: weiValue}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: SafeMath.sol
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).EDDY
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: Otium.sol
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Otium is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcludedFromReward;
address[] private _excludedFromReward;
address BURN_ADDRESS = 0x0000000000000000000000000000000000000001;
address public _projectAddress;
address public _charityAddress;
address public _marketingAddress;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tHODLrRewardsTotal;
string private _name = "Otium for the People";
string private _symbol = "OTIUM";
uint8 private _decimals = 18;
uint256 public _rewardFee = 1;
uint256 private _previousRewardFee = _rewardFee;
uint256 public _charityFee = 1;
uint256 private _previousCharityFee = _charityFee;
uint256 public _burnFee = 1;
uint256 private _previousBurnFee = _burnFee;
uint256 public _marketingFee = 1;
uint256 private _previousMarketingFee = _marketingFee;
uint256 public _projectFee = 3;
uint256 private _previousProjectFee = _projectFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
uint256 public _maxTxAmount = 1000000 * 10**18;
constructor ( address initialProjectAddress, address initialCharityAddress, address initialMarketingAddress ) {
require(
initialProjectAddress != address(0),
"Address should not be 0x00"
);
require(
initialMarketingAddress != address(0),
"Address should not be 0x00"
);
require(
initialCharityAddress != address(0),
"Address should not be 0x00"
);
_rOwned[_msgSender()] = _rTotal;
_projectAddress = initialProjectAddress;
_charityAddress = initialCharityAddress;
_marketingAddress = initialMarketingAddress;
//IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x10ED43C718714eb63d5aA57B78B54704E256024E); // binance PANCAKE V2
//IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // Ethereum mainnet, Ropsten, Rinkeby, Görli, and Kovan
IUniswapV2Router02 _uniswapV2Router =
IUniswapV2Router02(0x9Ac64Cc6e4415144C455BD8E4837Fea55603e5c3); //TestNet BSC Pancake
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
_isExcludedFromReward[address(this)] = true;
_isExcludedFromReward[BURN_ADDRESS] = true;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[BURN_ADDRESS] = true;
_isExcludedFromFee[_charityAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[_projectAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {return _name;}
function symbol() public view returns (string memory) {return _symbol;}
function decimals() public view returns (uint8) {return _decimals;}
function totalSupply() public view override returns (uint256) {return _tTotal;}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcludedFromReward[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function totalHODLrRewards() public view returns (uint256) {
return _tHODLrRewardsTotal;
}
function totalBurned() public view returns (uint256) {
return balanceOf(BURN_ADDRESS);
}
function totalProject() public view returns (uint256) {
return balanceOf(_projectAddress);
}
function totalCharity() public view returns (uint256) {
return balanceOf(_charityAddress);
}
function totalMarketing() public view returns (uint256) {
return balanceOf(_marketingAddress);
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcludedFromReward[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tHODLrRewardsTotal = _tHODLrRewardsTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcludedFromReward[account];
}
function excludeFromReward(address account) public onlyOwner {
require(!_isExcludedFromReward[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcludedFromReward[account] = true;
_excludedFromReward.push(account);
}
function includeInReward(address account) external onlyOwner {
require(_isExcludedFromReward[account], "Account is already excluded");
for (uint256 i = 0; i < _excludedFromReward.length; i++) {
if (_excludedFromReward[i] == account) {
_excludedFromReward[i] = _excludedFromReward[_excludedFromReward.length - 1];
_tOwned[account] = 0;
_isExcludedFromReward[account] = false;
_excludedFromReward.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setRewardFeePercent(uint256 rewardFee) external onlyOwner {
_rewardFee = rewardFee;
}
function setBurnFeePercent(uint256 burnFee) external onlyOwner {
_burnFee = burnFee;
}
function setProjectFeePercent(uint256 projectFee) external onlyOwner {
_projectFee = projectFee;
}
function setMarketingFeePercent(uint256 marketingFee) external onlyOwner {
_marketingFee = marketingFee;
}
function setCharityFeePercent(uint256 charitytFee) external onlyOwner {
_charityFee = charitytFee;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
receive() external payable {}
function _HODLrFee(uint256 rHODLrFee, uint256 tHODLrFee) private {
_rTotal = _rTotal.sub(rHODLrFee);
_tHODLrRewardsTotal = _tHODLrRewardsTotal.add(tHODLrFee);
}
function _getValues(uint256 tAmount)
private view returns (
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing
)
{
( tTransferAmount, tReward, tProject, tCharity, tBurn, tMarketing
) = _getTValues(tAmount, tTransferAmount, tReward, tProject, tCharity, tBurn, tMarketing);
( rAmount, rTransferAmount, rReward, tReward
) = _getRValues(tAmount, tReward, tProject, tBurn, tCharity, tMarketing, _getRate());
return (
rAmount,
rTransferAmount,
rReward,
tTransferAmount,
tReward,
tProject,
tBurn,
tCharity,
tMarketing);
}
function _getTValues(
uint256 tAmount,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing
) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
tReward = calculateRewardFee(tAmount);
tProject = calculateProjectFee(tAmount);
tBurn = calculateBurnFee(tAmount);
tCharity = calculateCharityFee(tAmount);
tMarketing = calculateMarketingFee(tAmount);
tTransferAmount = tAmount.sub(tReward);
tTransferAmount = tTransferAmount.sub(tBurn);
tTransferAmount = tTransferAmount.sub(tCharity);
tTransferAmount = tTransferAmount.sub(tProject);
tTransferAmount = tTransferAmount.sub(tMarketing);
return (tTransferAmount, tReward, tProject, tCharity, tBurn, tMarketing);
}
function _getRValues(
uint256 tAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing,
uint256 currentRate
) private pure returns (
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward, uint256) {
rAmount = tAmount.mul(currentRate);
rReward = tReward.mul(currentRate);
rTransferAmount = rAmount.sub(rReward);
rTransferAmount = rTransferAmount.sub(tBurn.mul(currentRate));
rTransferAmount = rTransferAmount.sub(tCharity.mul(currentRate));
rTransferAmount = rTransferAmount.sub(tProject.mul(currentRate));
rTransferAmount = rTransferAmount.sub(tMarketing.mul(currentRate));
return (rAmount, rTransferAmount, rReward, tReward);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excludedFromReward.length; i++) {
if (_rOwned[_excludedFromReward[i]] > rSupply || _tOwned[_excludedFromReward[i]] > tSupply)
return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excludedFromReward[i]]);
tSupply = tSupply.sub(_tOwned[_excludedFromReward[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function calculateRewardFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_rewardFee).div(
10**2
);
}
function calculateBurnFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_burnFee).div(
10**2
);
}
function calculateCharityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_charityFee).div(
10**2
);
}
function calculateMarketingFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_marketingFee).div(
10**2
);
}
function calculateProjectFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_projectFee).div(
10**2
);
}
function removeAllFee() private {
if(_rewardFee == 0 && _burnFee == 0 && _projectFee == 0 && _charityFee == 0 && _marketingFee == 0) return;
_previousRewardFee = _rewardFee;
_previousBurnFee = _burnFee;
_previousProjectFee = _projectFee;
_previousCharityFee = _charityFee;
_previousMarketingFee = _marketingFee;
_rewardFee = 0;
_burnFee = 0;
_projectFee = 0;
_charityFee = 0;
_marketingFee = 0;
}
function restoreAllFee() private {
_rewardFee = _previousRewardFee;
_burnFee = _previousBurnFee;
_projectFee = _previousProjectFee;
_charityFee = _previousCharityFee;
_marketingFee = _previousMarketingFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcludedFromReward[sender] && !_isExcludedFromReward[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcludedFromReward[sender] && _isExcludedFromReward[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcludedFromReward[sender] && !_isExcludedFromReward[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcludedFromReward[sender] && _isExcludedFromReward[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferBurn(address sender, uint256 tBurn) private {
uint256 currentRate = _getRate();
uint256 rBurn = tBurn.mul(currentRate);
_rOwned[BURN_ADDRESS] = _rOwned[BURN_ADDRESS].add(rBurn);
if(_isExcludedFromReward[BURN_ADDRESS])
_tOwned[BURN_ADDRESS] = _tOwned[BURN_ADDRESS].add(tBurn);
emit Transfer(sender, BURN_ADDRESS, tBurn);
}
function _transferProject(address sender, uint256 tProject) private {
uint256 currentRate = _getRate();
uint256 rProject = tProject.mul(currentRate);
_rOwned[_projectAddress] = _rOwned[_projectAddress].add(rProject);
if(_isExcludedFromReward[_projectAddress])
_tOwned[_projectAddress] = _tOwned[_projectAddress].add(tProject);
emit Transfer(sender, _projectAddress, tProject);
}
function _transferMarketing(address sender, uint256 tMarketing) private {
uint256 currentRate = _getRate();
uint256 rMarketing = tMarketing.mul(currentRate);
_rOwned[_marketingAddress] = _rOwned[_marketingAddress].add(rMarketing);
if(_isExcludedFromReward[_marketingAddress])
_tOwned[_marketingAddress] = _tOwned[_marketingAddress].add(tMarketing);
emit Transfer(sender, _marketingAddress, tMarketing);
}
function _transferCharity(address sender, uint256 tCharity) private {
uint256 currentRate = _getRate();
uint256 rCharity = tCharity.mul(currentRate);
_rOwned[_charityAddress] = _rOwned[_charityAddress].add(rCharity);
if(_isExcludedFromReward[_charityAddress])
_tOwned[_charityAddress] = _tOwned[_charityAddress].add(tCharity);
emit Transfer(sender, _charityAddress, tCharity);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_transferBurn(sender, tBurn);
_transferProject(sender, tProject);
_transferCharity(sender, tCharity);
_transferMarketing(sender, tMarketing);
_HODLrFee(rReward, tReward);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_transferBurn(sender, tBurn);
_transferProject(sender, tProject);
_transferCharity(sender, tCharity);
_transferMarketing(sender, tMarketing);
_HODLrFee(rReward, tReward);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount)
private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_transferBurn(sender, tBurn);
_transferProject(sender, tProject);
_transferCharity(sender, tCharity);
_transferMarketing(sender, tMarketing);
_HODLrFee(rReward, tReward);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rReward,
uint256 tTransferAmount,
uint256 tReward,
uint256 tProject,
uint256 tBurn,
uint256 tCharity,
uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_transferBurn(sender, tBurn);
_transferProject(sender, tProject);
_transferCharity(sender, tCharity);
_transferMarketing(sender, tMarketing);
_HODLrFee(rReward, tReward);
emit Transfer(sender, recipient, tTransferAmount);
}
}
Contrat en testnet:
1 Like
Not sure why you can not.
Have done https://testnet.bscscan.com/address/0x8702cb6908d8de666bbb54f18762047791590c1b#code
1 Like
What!!! ??
In my country it is said …
“Estoy flipando en colores…” = “I’m freaking out in colors …”
@Skyge
What could have happened?
1 Like
Follow the tutorial I wrote above.
1 Like
I have followed the tutorial to the letter. I wouldn’t have asked you if I hadn’t tried.
The failure continues to piss me off because I don’t understand what happened. However, thank you very much for your time.
4 Likes
Please help me, ive been actively trying for 2 days non stop to fix this error in verifying this is the error
myc:300:33: TypeError: Definition of base has to precede definition of derived contract
contract DividendPayingToken is ERC20, IDividendPayingToken, IDividendPayingTokenOptional {
1 Like
Hi, welcome! 
I think just like the error message, you should make sure you have a correct orders of all your contracts in a single file, maybe you can use the plugin to verify your contracts by multi-files: Verify smart contract inheriting from OpenZeppelin Contracts - General / Guides and Tutorials - OpenZeppelin Community
2 Likes
I have no clue how to fix this can u help me verify please? I’ve been re reading the article for hours and can’t figure what to fix, when I flattened maybe things got put out of place?
1 Like
I cant figure out what to change for the contract to be first and second
1 Like
I think I have explain as detailed as I can. So what is your source code and contract address?
1 Like
Hi there, I've followed your steps about having contract before abstract contract and it seems to still error when trying to verify the contract. Are you able to have a look at my code?
// File: @openzeppelin/contracts/access/Ownable.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/math/Math.sol
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute.
return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// File: @openzeppelin/contracts/utils/Arrays.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to array types.
*/
library Arrays {
/**
* @dev Searches a sorted `array` and returns the first index that contains
* a value greater or equal to `element`. If no such index exists (i.e. all
* values in the array are strictly less than `element`), the array length is
* returned. Time complexity O(log n).
*
* `array` is expected to be sorted in ascending order, and to contain no
* repeated elements.
*/
function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
if (array.length == 0) {
return 0;
}
uint256 low = 0;
uint256 high = array.length;
while (low < high) {
uint256 mid = Math.average(low, high);
// Note that mid will always be strictly less than high (i.e. it will be a valid array index)
// because Math.average rounds down (it does integer division with truncation).
if (array[mid] > element) {
high = mid;
} else {
low = mid + 1;
}
}
// At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
if (low > 0 && array[low - 1] == element) {
return low - 1;
} else {
return low;
}
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Snapshot.sol
pragma solidity ^0.8.0;
/**
* @dev This contract extends an ERC20 token with a snapshot mechanism. When a snapshot is created, the balances and
* total supply at the time are recorded for later access.
*
* This can be used to safely create mechanisms based on token balances such as trustless dividends or weighted voting.
* In naive implementations it's possible to perform a "double spend" attack by reusing the same balance from different
* accounts. By using snapshots to calculate dividends or voting power, those attacks no longer apply. It can also be
* used to create an efficient ERC20 forking mechanism.
*
* Snapshots are created by the internal {_snapshot} function, which will emit the {Snapshot} event and return a
* snapshot id. To get the total supply at the time of a snapshot, call the function {totalSupplyAt} with the snapshot
* id. To get the balance of an account at the time of a snapshot, call the {balanceOfAt} function with the snapshot id
* and the account address.
*
* NOTE: Snapshot policy can be customized by overriding the {_getCurrentSnapshotId} method. For example, having it
* return `block.number` will trigger the creation of snapshot at the begining of each new block. When overridding this
* function, be careful about the monotonicity of its result. Non-monotonic snapshot ids will break the contract.
*
* Implementing snapshots for every block using this method will incur significant gas costs. For a gas-efficient
* alternative consider {ERC20Votes}.
*
* ==== Gas Costs
*
* Snapshots are efficient. Snapshot creation is _O(1)_. Retrieval of balances or total supply from a snapshot is _O(log
* n)_ in the number of snapshots that have been created, although _n_ for a specific account will generally be much
* smaller since identical balances in subsequent snapshots are stored as a single entry.
*
* There is a constant overhead for normal ERC20 transfers due to the additional snapshot bookkeeping. This overhead is
* only significant for the first transfer that immediately follows a snapshot for a particular account. Subsequent
* transfers will have normal cost until the next snapshot, and so on.
*/
abstract contract ERC20Snapshot is ERC20 {
// Inspired by Jordi Baylina's MiniMeToken to record historical balances:
// https://github.com/Giveth/minimd/blob/ea04d950eea153a04c51fa510b068b9dded390cb/contracts/MiniMeToken.sol
using Arrays for uint256[];
using Counters for Counters.Counter;
// Snapshotted values have arrays of ids and the value corresponding to that id. These could be an array of a
// Snapshot struct, but that would impede usage of functions that work on an array.
struct Snapshots {
uint256[] ids;
uint256[] values;
}
mapping(address => Snapshots) private _accountBalanceSnapshots;
Snapshots private _totalSupplySnapshots;
// Snapshot ids increase monotonically, with the first value being 1. An id of 0 is invalid.
Counters.Counter private _currentSnapshotId;
/**
* @dev Emitted by {_snapshot} when a snapshot identified by `id` is created.
*/
event Snapshot(uint256 id);
/**
* @dev Creates a new snapshot and returns its snapshot id.
*
* Emits a {Snapshot} event that contains the same id.
*
* {_snapshot} is `internal` and you have to decide how to expose it externally. Its usage may be restricted to a
* set of accounts, for example using {AccessControl}, or it may be open to the public.
*
* [WARNING]
* ====
* While an open way of calling {_snapshot} is required for certain trust minimization mechanisms such as forking,
* you must consider that it can potentially be used by attackers in two ways.
*
* First, it can be used to increase the cost of retrieval of values from snapshots, although it will grow
* logarithmically thus rendering this attack ineffective in the long term. Second, it can be used to target
* specific accounts and increase the cost of ERC20 transfers for them, in the ways specified in the Gas Costs
* section above.
*
* We haven't measured the actual numbers; if this is something you're interested in please reach out to us.
* ====
*/
function _snapshot() internal virtual returns (uint256) {
_currentSnapshotId.increment();
uint256 currentId = _getCurrentSnapshotId();
emit Snapshot(currentId);
return currentId;
}
/**
* @dev Get the current snapshotId
*/
function _getCurrentSnapshotId() internal view virtual returns (uint256) {
return _currentSnapshotId.current();
}
/**
* @dev Retrieves the balance of `account` at the time `snapshotId` was created.
*/
function balanceOfAt(address account, uint256 snapshotId) public view virtual returns (uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _accountBalanceSnapshots[account]);
return snapshotted ? value : balanceOf(account);
}
/**
* @dev Retrieves the total supply at the time `snapshotId` was created.
*/
function totalSupplyAt(uint256 snapshotId) public view virtual returns (uint256) {
(bool snapshotted, uint256 value) = _valueAt(snapshotId, _totalSupplySnapshots);
return snapshotted ? value : totalSupply();
}
// Update balance and/or total supply snapshots before the values are modified. This is implemented
// in the _beforeTokenTransfer hook, which is executed for _mint, _burn, and _transfer operations.
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) {
// mint
_updateAccountSnapshot(to);
_updateTotalSupplySnapshot();
} else if (to == address(0)) {
// burn
_updateAccountSnapshot(from);
_updateTotalSupplySnapshot();
} else {
// transfer
_updateAccountSnapshot(from);
_updateAccountSnapshot(to);
}
}
function _valueAt(uint256 snapshotId, Snapshots storage snapshots) private view returns (bool, uint256) {
require(snapshotId > 0, "ERC20Snapshot: id is 0");
require(snapshotId <= _getCurrentSnapshotId(), "ERC20Snapshot: nonexistent id");
// When a valid snapshot is queried, there are three possibilities:
// a) The queried value was not modified after the snapshot was taken. Therefore, a snapshot entry was never
// created for this id, and all stored snapshot ids are smaller than the requested one. The value that corresponds
// to this id is the current one.
// b) The queried value was modified after the snapshot was taken. Therefore, there will be an entry with the
// requested id, and its value is the one to return.
// c) More snapshots were created after the requested one, and the queried value was later modified. There will be
// no entry for the requested id: the value that corresponds to it is that of the smallest snapshot id that is
// larger than the requested one.
//
// In summary, we need to find an element in an array, returning the index of the smallest value that is larger if
// it is not found, unless said value doesn't exist (e.g. when all values are smaller). Arrays.findUpperBound does
// exactly this.
uint256 index = snapshots.ids.findUpperBound(snapshotId);
if (index == snapshots.ids.length) {
return (false, 0);
} else {
return (true, snapshots.values[index]);
}
}
function _updateAccountSnapshot(address account) private {
_updateSnapshot(_accountBalanceSnapshots[account], balanceOf(account));
}
function _updateTotalSupplySnapshot() private {
_updateSnapshot(_totalSupplySnapshots, totalSupply());
}
function _updateSnapshot(Snapshots storage snapshots, uint256 currentValue) private {
uint256 currentId = _getCurrentSnapshotId();
if (_lastSnapshotId(snapshots.ids) < currentId) {
snapshots.ids.push(currentId);
snapshots.values.push(currentValue);
}
}
function _lastSnapshotId(uint256[] storage ids) private view returns (uint256) {
if (ids.length == 0) {
return 0;
} else {
return ids[ids.length - 1];
}
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
unchecked {
_approve(account, _msgSender(), currentAllowance - amount);
}
_burn(account, amount);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: contracts/Matrix Protocol.sol
pragma solidity ^0.8.2;
contract MatrixProtocol is ERC20, ERC20Burnable, ERC20Snapshot, Ownable {
constructor() ERC20("Matrix Protocol", "MTX") {
_mint(msg.sender, 250000000 * 10 ** decimals());
}
function snapshot() public onlyOwner {
_snapshot();
}
function mint(address to, uint256 amount) public onlyOwner {
_mint(to, amount);
}
function _beforeTokenTransfer(address from, address to, uint256 amount)
internal
override(ERC20, ERC20Snapshot)
{
super._beforeTokenTransfer(from, to, amount);
}
}
1 Like
Hi, welcome!
Please read the part Common Errors at the above tutorial.
1 Like
I did this, it didn't help sorry.
1 Like
Leave one SPDX license at the top, and remove all of the others throughout the code
1 Like
Hey, @Skyge thanks for the tutorial! A massive help.
I am trying to learn the ways of crypto and decided to copy a coin. I am getting an error when Verifying & Publishing Contract Source Code.
I initially tried the multiple file way and was getting the same error then came across your tutorial flattened the file then had to re-arrange the code a bit and it compiles perfectly in remix. But when I verify it on BSC I get the following error;
Error! Unable to generate Contract ByteCode and ABI (Expected library(ies) but one or more was not provided)
Found the following ContractName(s) in source code : Context , DividendPayingToken , DividendPayingTokenInterface , DividendPayingTokenOptionalInterface , ERC20 , GOLDENCAKE , GOLDENCAKEDividendTracker , IERC20 , IERC20Metadata , IUniswapV2Factory , IUniswapV2Pair , IUniswapV2Router01 , IUniswapV2Router02 , IterableMapping , Ownable , SafeMath , SafeMathInt , SafeMathUint
But we were unable to locate a matching bytecode (err_code_2)
and also this We tried looking for a match from the list of compiled contract bytecode outputs (as listed below) but was unable to find an exact match.
I am stuck not sure what to do? Are you able to help at all? or anyone else that has come across a similar issue?
Thank you
1 Like
Hi, welcome! 
If you want to verify your contract with multi-files, you are not expected to flatten all contracts into a single file.
So what is your source code and contract address?
1 Like