Bscscan Verification Error

Hello guys I’m trying to verify my contract below , can someone help me as im having trouble doing it so .
contract;
0xa34Eb8A1cfE19C70eB612B3a4e3D46DEeE57Dacd

Error!Unable to generate Contract ByteCode and ABI

Hi welcome to Open Zeppelin Fewdehcat.

Please refer to this tutorial. Verify ERC20 token on Etherscan that was deployed through Remix: Step by Step Guide

Search the forum before you ask questions.

1 Like

Thank you for that link. it is so helpful. I just had an issue because I am using a single page. Here is my contract code:

compiler: v0.4.26+command.4563c3fc
License: No License

/**
 *Submitted for verification at BscScan.com on 2021-06-06
*/

// SPDX-License-Identifier: MIT

/**

   Little Cockroach (LCR) -
   
   What do you get at the end of a joint of dick weed? Cock roach.

   
   - LP locked guaranteed or little Cockroach will eat me alive
   - 50% of supply burned 
   - 15% is for marketing and additional burn 
   - dev wallet is 2% of the supply only for startin up the proj
   - ownership will be renounced when community is strong enough to take over
   - 1000% rug free 
   
   This token is certified rug proof. Get on early to maximize your profit.


   
 */

pragma solidity ^0.4.4;

contract Token {

    /// @return total amount of tokens
    function totalSupply() constant returns (uint256 supply) {}

    /// @param _owner The address from which the balance will be retrieved
    /// @return The balance
    function balanceOf(address _owner) constant returns (uint256 balance) {}

    /// @notice send `_value` token to `_to` from `msg.sender`
    /// @param _to The address of the recipient
    /// @param _value The amount of token to be transferred
    /// @return Whether the transfer was successful or not
    function transfer(address _to, uint256 _value) returns (bool success) {}

    /// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
    /// @param _from The address of the sender
    /// @param _to The address of the recipient
    /// @param _value The amount of token to be transferred
    /// @return Whether the transfer was successful or not
    function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}

    /// @notice `msg.sender` approves `_addr` to spend `_value` tokens
    /// @param _spender The address of the account able to transfer the tokens
    /// @param _value The amount of wei to be approved for transfer
    /// @return Whether the approval was successful or not
    function approve(address _spender, uint256 _value) returns (bool success) {}

    /// @param _owner The address of the account owning tokens
    /// @param _spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}

    event Transfer(address indexed _from, address indexed _to, uint256 _value);
    event Approval(address indexed _owner, address indexed _spender, uint256 _value);
    
}



contract StandardToken is Token {

    function transfer(address _to, uint256 _value) returns (bool success) {
        //Default assumes totalSupply can't be over max (2^256 - 1).
        //If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
        //Replace the if with this one instead.
        //if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
        if (balances[msg.sender] >= _value && _value > 0) {
            balances[msg.sender] -= _value;
            balances[_to] += _value;
            Transfer(msg.sender, _to, _value);
            return true;
        } else { return false; }
    }

    function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
        //same as above. Replace this line with the following if you want to protect against wrapping uints.
        //if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
        if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
            balances[_to] += _value;
            balances[_from] -= _value;
            allowed[_from][msg.sender] -= _value;
            Transfer(_from, _to, _value);
            return true;
        } else { return false; }
    }

    function balanceOf(address _owner) constant returns (uint256 balance) {
        return balances[_owner];
    }

    function approve(address _spender, uint256 _value) returns (bool success) {
        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
        return true;
    }

    function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
      return allowed[_owner][_spender];
    }

    mapping (address => uint256) balances;
    mapping (address => mapping (address => uint256)) allowed;
    uint256 public totalSupply;
}


// Token name and Symbol
contract LittleCockroach is StandardToken {

    function () {
        //if ether is sent to this address, send it back.
        throw;
    }

    /* Public variables of the token */

    /*
    NOTE:
    The following variables are OPTIONAL vanities. One does not have to include them.
    They allow one to customise the token contract & in no way influences the core functionality.
    Some wallets/interfaces might not even bother to look at this information.
    */
    string public name;                   //fancy name: eg Simon Bucks
    uint8 public decimals;                //How many decimals to show. ie. There could 1000 base units with 3 decimals. Meaning 0.980 SBX = 980 base units. It's like comparing 1 wei to 1 ether.
    string public symbol;                 //An identifier: eg SBX
    string public version = '1.1.3';       //human 0.1 standard. Just an arbitrary versioning scheme.

// VALUES FOR TOKEN

    function LittleCockroach(
        ) {
        balances[msg.sender] = 100000000000000000000000000000000000000;               
        totalSupply = 100000000000000000000000000000000000000;                       
        name = "LittleCockroach";                                   
        decimals = 18;                            
        symbol = "LCR";                               
    }

    /* Approves and then calls the receiving contract */
    function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);

        //call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
        //receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
        //it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
        if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
        return true;
    }
}

So have you followed the tutorial yoshiko mentioned above? Did you encounter some problems?

1 Like

Yeah thank you… ve been having a hard time with the import function so i tried different method

I try to verify your code, but it failed, so maybe this is not the original code.
And you can also use the plugin to verify your code, look at this tutorial: